Engine Rebuild Parts


Cylinder Head Bolt / 11095AA042 / 7.26 / 12 / 87.12
Cylinder Block Case Bolt / 800210990 / 2.59 / 8 / 20.72
Cylinder Block Case Washer / 803010120 / 0.33 / 4 / 1.32
Cylinder Block Straight Pin / 804014060 / 2.28 / 4 / 9.12
Camshaft Bolt / 808106180 / 0.74 / 24 / 17.76
Intake Valve Guide / 13212AA090 / 13.29 / 8 / 106.32
Exhaust Valve Guide / 13213AA100 / 12.92 / 8 / 103.36
Cylinder Head Plug / 11051AA070 / 4.43 / 4 / 17.72
Camshaft Sprocket, Intake, Left / 13051AA020 / 71.92 / 1 / 71.92
Camshaft Sprocket, Exhaust, Left / 13054AA020 / 71.92 / 1 / 71.92
Camshaft Sprocket, Intake, Right / 13044AA020 / 76.74 / 1 / 76.74
Camshaft Sprocket, Exhaust, Right / 13049AA020 / 76.74 / 1 / 76.74
Camshaft Sprocket Bolt / 800112080 / 1.51 / 4 / 6.04
Exhaust Valve / 13202AA283 / not available in the U.S.
Intake Valve / 13201AA252 / 10.66 / 8 / 85.28
Valve Spring Seat / 13227AA040 / 0.7 / 16 / 11.2
Valve Spring / 13217AA090 / 5.77 / 16 / 92.32
Valve Spring Retainer / 13209AA050 / 2.17 / 16 / 34.72
Lifter / 13230AA160 / 28.45 / 16 / 455.2
Manifold-Uppipe Gasket / 44022AA170 / 10.16 / 1 / 10.16
Uppipe-Turbo Gasket / 44022AA150 / 10.16 / 1 / 10.16
Turbo-Downpipe Gasket / 44022AA180 / 16.07 / 1 / 16.07
Idler Pulley / 13073AA142 / 54.86 / 2 / 109.72
Idler Pulley Bolt / 800110360 / 0.89 / 2 / 1.78
Idler Gear / 13085AA080 / 57.86 / 1 / 57.86
Idler Gear bolt / 800110240 / 0.94 / 1 / 0.94
Crankshaft Pulley / 12305AA242 / 109.76 / 1 / 109.76
Crankshaft Pulley Bolt / 800213030 / 3.26 / 1 / 3.26
Timing belt Guide / 13145AA021 / 4.04 / 1 / 4.04
Timing belt Guide Bolt / 800706800 / 0.18 / 2 / 0.36
Timing Belt / 13028AA072 / 64.38 / 1 / 64.38
Rocker Cover Gasket, left side / 13272AA040 / 8.02 / 1 / 8.02
Rocker Cover Gasket, right side / 13270AA040 / 8.02 / 1 / 8.02
Rocker Cover Gasket, No. 2 / 13293AA030 / 3.62 / 4 / 14.48
Rocker Cover Bolt / 800706630 / 0.74 / 12 / 8.88
Oil Pan / 11109AA053 / 53.55 / 1 / 53.55
Oil Pan Bolt,Washer / 800506350 / 0.29 / 14 / 4.06
Connecting Rod / 12100AA240 / 52.7 / 4 / 210.8
Crankshaft complete / 12200AA150 / 364.71 / 1 / 364.71


Radiator Parts


Right Radiator Bracket / 45116FA012 / 6.01 / 2 / 12.02
Mount Bushing / 45106AA030 / 3.72 / 4 / 14.88
Bolt / 901000271 / 0.34 / 4 / 1.36


Oil Cooler System


Oil Cooler Cp / 21311AA021 / 119.76 / 1 / 119.76
Hose / 807611031 / 7.72 / 3 / 23.16
Connector / 21317AA022 / 31.76 / 1 / 31.76
Hose Connector / 21369AA040 / 25.88 / 1 / 25.88
Cooler Pipe / 21328AA011 / 21.79 / 1 / 21.79
Hose Clamp / 805918010 / 1.79 / 6 / 10.74
Bolt / 10406100 / 0.67 / 1 / 0.67


Extras


Hood Duct / 90818FA020 / 35.01 / 1 / 35.01
Hood Duct Bellows / 90818FA060 / 24.4 / 1 / 24.4
Hood Complete / 57220FA050 / not available online ($426.90 list)



The radiator parts can be used to install the Turbo legacy radiator into the RS by just using two of the right side brackets. Also, the Hood Duct and hood Duct Bellows are the parts that comprise the "splitter" type thing for the ****** intercooler. I was very surprised there was a U.S. Part Number. Additionally, you can buy the version II hood that the intercooler duct can bolt up to (it doesn't on RS hoods).

I might post some more, but i'm not sure what else.

 

Boost Solenoid System


Boost Solenoid Bracket / 14874AA030 / 31.35 / 1 / 31.35
Solenoid Valve / 14774AA341 / 95.32 / 1 / 95.32
Duty solenoid valve / 16102AA013 / 138.01 / 1 / 138.01
Vacuum Sensor / 22012AA020 / 318.12 / 1 / 318.12
Vacuum Hose / 807503422 / 7.5 / 1 / 7.5
Bushing / 14879AA001 / 3.89 / 4 / 15.56
Grommet / 14878AA000 / 1.93 / 2 / 3.86
Nut / 23806006 / 0.1 / 3 / 0.3
Flange Bolt / 10006126 / 0.26 / 3 / 0.78
Bolt, Washer / 01160514G / 0.71 / 2 / 1.42


As you can see if you don't have this part it is better to just find one used somewhere or else it will cost you a pretty penny.


Other parts

Water Pump Complete / 21111AA026 / 87.8 / 1 / 87.8
Oil Pump Complete / 15010AA300 / 102.44 / 1 / 102.44

 

Hey do you have a part number for atmospheric pressure sensor? for an ej20g?

 

I think there is another thread just like this

EDIT: Found it
http://www.rs25.com/forums/showthread.php?t=73890

 

ha, it should be stickied then i wouldn't have had to do all that work. I never found that when searching for some wierd reason.

I included prices also for what's it's worth.

 

its cool i would never have know except I was looking at it just 2 weeks before you posted yours.. Just post up in there and link to this thread that way you tie the two together

 

this should be a sticky

 

x2!

 

I'm slowing updating...

 

great thread!

 

Good stuff... I was planning on doing this soon, but I guess this saves me the trouble lol

 

yea I really only did it because a lot of people are scared of EJ20Gs because of part availability, but the EJ25D, EJ18 and a lot of other phase 1 motors share parts not to mention the EJ205. If you take a part number from this thread and search for it on subarugenuineparts.com you will see what year car or what engine it comes from so you can even get some parts used from other engines. The EJ20G MAF can be found on a 2.2L N/A car instead of paying $300 for example.

 

oxygen sensor

hey guys lets see if anyone can help me i have a ej20g engine with ej20k turbo uppipe intake manifold downpipe wiring and ecu ... i need the oxygen sensor before the turbo on the exhaust manifold ... can anyone help ... oh yeah also i have a ej20k transmission ... and i need that draining plug for it bc im leaking

 

Awesome! This thread is the best. Just used it to tell the dealer what part number I needed for my EJ20G IACV. Shove that up your piehole dealer, I WONT give you a VIN number.

 

you should do this for ej20k stuff now

 

^ Pretty sure the '20K doesn't share nearly as many parts with the USDM as a '20G does.

 

shares a lot with the '98 DOHC NA engine, or at least moreso than any other USDM engine. i never said there would be complete list, but if the OP has the info available, why not?

 

your awesome, i needed these part numbers

 

now where can i order these parts?

 

japanparts

 

What about the shift linkage? What year and model can I use?

 

What year 2.2 n/a works? My 2.2 does not work with my 20g

 

Alright so used that part number for water pump and mine is different. I have ej20g from a 95 wrx wagon. Pump I need only has two ports. Doing gates kit.

 

I need the whole intake system where could I find this even the elbow that goes to the turbo with the two inlets

 

Necrobump! Are the V2 STi side feeds (Phase 1) fuel injector seals the same as a 95 NA Impreza? I want to swap out my G's 380cc injectors for 440s.

 

Gents, does anyone know the part number for the lower coolant line that runs between the turbo and the block for an EJ20G (V1 STi RA, if it matters)? Mine is leaking and I need a new hardline (attached to engine), banjo bolt, and washers. Bolt "B" and the attached hardline are what I'm trying to find.

[/URL]