Does anyone who is good with wiring know what wires are on B136-26 and B136-34 for the ECU of an Usdm 06 WRX.These seem to be missing from the ECU pinout sheet, and I have been trying to figure this out for a long time, but can't seem to figure it out. If you know and help, I would appreciate it. Thanks. P.S. Hate to be a bother.
owenwes
Nope, the STi pinouts are different, which is what the diagram is specifying.
For a WRX C26 and C34 go to the Immobilizer module.
It's likely a mitsu module, but getting rid of that will be impossible if you want the car to run on a stock ECU. If you have an aftermarket ECU they should be deletable.
For a WRX C26 and C34 go to the Immobilizer module.
It's likely a mitsu module, but getting rid of that will be impossible if you want the car to run on a stock ECU. If you have an aftermarket ECU they should be deletable.
The D pins are for an STi, not for a WRX. Just ignore them.
You said you had an 06 WRX in the OP?
You said you had an 06 WRX in the OP?
Right. So for all intents and purposes it's an 06 WRX. So you'll use the 06 WRX pinout portion of the diagram.
I've taken out the parts that don't matter for your application.
![Image]()
I've taken out the parts that don't matter for your application.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
