[Azer408]

I know these are drags and please don't flame. But I've been looking at wheels lately and I've been letting these Drags grow on me The CE28N reps from Drag, the DR-9 Bronze wheels look pretty good.

and so do their Volk GT-V replica's the DR-31's have started to grow on me.

My question is would it be possible for me to snap on some DR31's(bronze) with an offset of 35mm 17x8, or DR9's 17x7 with an offset of 40 wrapped in 225/45/17 without major pulling.

I'll most likely be getting a set of springs/struts or coils+bakemono plates to adjust camber and what not. I'd like to make it at least flush so I don't have my wheels stickin out like crazy and so i don't rub.

For now my suspension is stock with p1 lowering springs from owner before. These wheels are cheap and allow for extra money to go to better tires and they look pretty decent as well.

 

[Inflame]

 

[Azer408]

Nasioc.

What suspension did you have? See you sold them. Your tires look beefy as fuck. haha. Also how was the rolling on the fenders?

 

[Azer408]

Afternoon bump

 

[WhiteGhost2.5]

I thought this thread was about agressive fitment anyway. haha...

How about the example of fitting 35 offset 5zigens(17x8) on a GC?

17x8 5zigens 275/40/17 710's

17x9 Sportmax 275/40/17 Hankook 214's

Josh

 

[teeceRS]

InFlame, I want your car transformed into mine! or atleast your suspension and wheel set up. nice, clean coupe

 

[99GC8]

how hard was it to roll your fenders that much

 

[Kowitz]

Here's my car on my buddy's 18x8 +48 Tarmac III's, tires are 235/40s. Hopefully will be buying these this winter.

Rubbed with cut rear fenders. Another degree of camber and a slight pull and they'll be just fine. I cut the fenders instead of rolling because I didn't have a fender roller. Hopefully I'll have access to one soon. Friggin montana....

I want my car to look like this!

I actually like the 18's now haha

 

[aesthetect]

18x9.5 Rota Torques with 285/30/18 Kumho V710's

sick sick sick sick sick.

rota dpts 17x9 +27f +32r with 235/40/17 falken rt 615s

that is ideal fitment on worked stock fenders IMO. nice job. one day, i will venture there.

 

[NW_Abbitt]

Nasioc.

What suspension did you have? See you sold them. Your tires look beefy as fuck. haha. Also how was the rolling on the fenders?

thats not his car. thats Jardine's car.

those were drags 17x9 +18 with 235/40 azenis.

im pretty sure he sold the car

 

[NW_Abbitt]

InFlame, I want your car transformed into mine! or atleast your suspension and wheel set up. nice, clean coupe

lol jardines car is sold... unless Inflame bought it?

that is ideal fitment on worked stock fenders IMO. nice job. one day, i will venture there.

ehh his was really sketch. so many dents... haha

this aggressive thread is funny... 8 inch wide wheels are stock width...

 

[squidmaster]

great thread, can't wait to join it :naughty:

 

[99GC8]

im about to do some 17x8 +46 rims with 245/40/17 hoosier a6 tires i will need a least a 5mm spacer i think

 

[AWSneer]

Ooooo I'll post mine up soon


For now, see my avatar.

17x8 fm01rc's
245-40-17

Bc coils no camber perfect alignment
Rolled and slight pull in the front
Rolled and slight pull in the rear

Rubbing occurs when hard bumps are hit on full soft (rubs on rear fender where the bumper attached to it)

Any ideas on how to fix that?

 

[AWDALBERT]

how hard was it to roll your fenders that much

not hard at all just start the roller at an angle like this / and don't change the head position until you the the desired angle of the lip

 

[AWDALBERT]

(rubs on rear fender where the bumper attached to it)

Any ideas on how to fix that?

re locate the bumper mount cut the fender and roll that part flat

 

[poleboy90]

this aggressive thread is funny... 8 inch wide wheels are stock width...

Negative, stock width on GCs are 7 inch. I consider 245 width tires to be aggressive.

 

[jnorth85]

Just got these on over the weekend 245/45/17 RE01R's
no rubbing after a hard track day.

 

[inoneday]

ill be looking at getting 17x 9.5 very soon

 

[Inflame]

thats not his car. thats Jardine's car.

those were drags 17x9 +18 with 235/40 azenis.

im pretty sure he sold the car

Yup, not my car (even tho mine looks basically exactly like it).

Sorry for the confusion everyone!

- Bart