Subaru Impreza GC8 & RS Forum & Community banner
1 - 6 of 6 Posts

· Registered
MY98 2.5RS Brilliant Red
Joined
·
220 Posts
Discussion Starter · #1 · (Edited)
I am looking to get the HTautos bonnet set (STi scoop, and one vent scoop and the 22b other vent), do these all bolt up to USDM steel 2.5RS hoods? I can swallow the $350 for the bonnet set, but needing a new hood + paint is NOT in the budget right now (judging from people that have bought the aluminum hoods for the GC and used the stock RS vents, I would assume they work, just want to be sure and that the STi scoop will fit). Here is the bonnet set I am looking at:





ALSO, could someone point me in the right direction for the rear spats (not the aeroguard ones), but the 2 L shaped pieces that go on the sides of the rear bumper with a bit of DIY from scoobymods: http://www.scoobymods.com/forums/showthread.php?t=42

I looked all over subaruparts.com for 02' WRX rear spats, and found nothing.


Thank you all very much!
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top