[Impreziv 2.5]

Ok, There has to be some type of up and downpipe that will clear the non turbo X member. There are tons out there there has to be SOME! So far that is the only hickup I am having in ordering my parts.

Help please?!

-Doug

 

[Sarra]

Xmember swap?

 

[damonmlime]

Subachad's is the only one I know of.

 

[HondaH8er]

Subachad's is the only one I know of.

Yup, his up and down pipes use the stock header, but so do the AVO pipes. Don't know if they sell them in anything but the turbo kit, though. There is also the option of having a set made, but that might get expensive, unless you can do it yourself.

 

[joejoe69]

it looks fairly easy to make. a 90 degree bend for the uppipe, 2 90 degree bends for the downpipe. all you gotta do is offset the flanges to fit. i should've done it this way instead of grabbing GD parts. DOH!!

 

[Impreziv 2.5]

I will Have to talk to an exhaust shop monday.

 

[Gumby647]

Or you could just buy a used turbo kit that includes the up-pipe and down pipe that will work with the NA headers and crossmember such as the one I could sell you on the cheap.

 

[Impreziv 2.5]

what is cheap?

 

[Gumby647]

http://www.rs25.com/forums/showthread.php?t=69764

$750 shipped

 

[Impreziv 2.5]

Figured out a method to my maddness.