[DS1 Motorsports Inc.]

Tomei ARMS M-7760 Bolt-On Turbo
PM For One Time Intro Pricing​

Tomei sent us the entire US allotment of their M-7760 turbos. Thats right we have them all. Tomei wants us to get these turbos out and get them on as many different cars as possible so we are offering the three we have left at a very special price. This price is only good for these three after they are gone thats it!

There is a catch though, we are going to select the car very carefully. We are looking for an assortment of cars to have them on. Please post pictures and a full mod list and we will make a decision on who's lucky enough to get them. We are also looking to use your car for advertisements so we will need several high resolution pictures and dyno graphs for before and after. So its kinda like a little contest and the only requirements are that you have a car.

Read More Inside....

 

[DS1 Motorsports Inc.]

The ARMS-M7760 turbocharger was chosen because its size and dimension allows it to be swapped out in place of the stock turbo placement. Increasing turbocharger size usually hinders throttle response, however we have avoided this issue without sacrificing this aspect. This was made possible by carefully selecting the most ideal combination of components. As usual Tomei's kit includes all factory gaskets and necessary hardware. A bigger turbo without the lag, what more could you want?

Thanks,
DS1

 

[01rs25]

If I was still boosted I would be submitting...


But I'll gladly keep it safe in my front seat!

 

[Circaisdashiat]

Not sure if i can afford it, but ill submit to find out.

Check out my members journal for more pictures, and the story of 95 FWD to AWD WRX with GD dash

MOD list

Drivetrain:
2003 EJ205 WRX engine
2003 WRX 5 spd tranny
2003 WRX front Xmember and WRX tranny Xmember
2003 WRX gas tank
2003 WRX drive shaft
2003 WRX rear subframe
2003 WRX read diff
2003 WRX axles
2003 WRX hubs
2003 WRX brakes - with EBC, and Cobb pads
Rotora Slotted Rotors
COBB tuning steel braided brake lines
After market clutch (not sure what it is)
2005 STi Catback exhaust
STi short shifting linkage
Catless uppipe
COBB tuning heatshield

Exterior:
2001 2.5rs hood
2001 2.5rs fenders
2001 2.5rs Sideskirts
2001 2.5rs rear bumper
2001 2.5rs doors
STi Version 5 ABS wing (not installed)
2003 WRX foglights
JDM STi V6 grill
JDM V5 replica ABS wing
JDM STi V6 Front lip
JDM STi V6 rear spats
Depo Black Headlights
2003 WRX intercooler splitter
Hella Supertones
5000K HID headlights
17" Rota Battles

Interior:
2003 WRX dash conversion
2003 WRX MOMO steering wheel
JDM STi V7 front AND REAR seats (super rare)
Autometer mechanical boost gauge
ApexI El boost gauge (not installed)
2006 WRX 6 disk CD changer
2001 2.5RS door panels
Sabelt 4 point harness
2001 2.5RS seatbelts
Sony Xplode 130w speakers

Handling:
Megan Racing Street coilovers 32-way adjustable
SYMS front strut tower bar
COBB tuning battery tie down
Falkin Atzenis RT615 225/45 tires
20mm JDM STi rear sway bar
2003 WRX steering rack
New STi Group N motor and tranny mounts.

 

[aspect]

Can you give an idea of what other turbos this unit is similar to in terms of power output and spool?

IE, "it spools like a xxx but has the top end of a yyy"

 

[01rs25]

Can you give an idea of what other turbos this unit is similar to in terms of power output and spool?

I was just thinking about this...

 

[DS1 Motorsports Inc.]

Can you give an idea of what other turbos this unit is similar to in terms of power output and spool?

IE, "it spools like a xxx but has the top end of a yyy"

It spools a little later than a vf39 and is good for 22lbs to redline.

 

[scooby22t]

my car is begging for a bigger turbo.
i will post a mod list when i get home...

 

[DumbUglyDragon]

http://www.tomei-p.co.jp/_2003web-catalogue/000_arms/product_arms_m7760-en.html

 

[MilesToEmpty]

So this turbo compares to what?

How does it spool compared to a 20g?

 

[darksurfer81]

Do you want pictures sent directly to you with the mod list or do you want them on here?

 

[aspect]

So it's good for about 30 crank hp more than a vf34 on a 2.0?

Looks like a sweet turbo but I'm not sure about that "largest turbo you can fit in the stock location thing"

 

[Brownie]

The ARMS-M7760 turbocharger was chosen because its size and dimension allows it to be swapped out in place of the stock turbo placement. Increasing turbocharger size usually hinders throttle response, however we have avoided this issue without sacrificing this aspect

Taking what you've said, and what's said on Tomei's site:
"The ARMS M7760 is the largest bolt-on turbo possible that the engineers can fit into the limited space of the EJ engine. Despite the size, the internals of the turbocharger speaks other wise; extracting the most and finest efficiency from its design."

This should be competitive with something like a FP Green, but judging from this: http://www.tomei-p.co.jp/_2003web-catalogue/000_arms/image/turbinekit_ej2025/EJ20_graph_big-e.jpg and you saying it can push 22lbs to redline...

I'd say you're probably better off getting a coated 18g and saving the JDM bling surcharge fee. Just like the Greddy turbo kits available, they're not bad setups at all, there are just much better options out there, the only reason I could see someone wanting this, besides cheap intro prices (if they exist), is just to be "JDM" and "different". Bleh

 

[Wrally2.5rs]

have a 2000 rs
2002 WRX
AP version 1
Stock turbo/injectors
Stock intake/intercooler
Ported stock exhaust manifold(both cast pieces and crossover pipe)
Ultimate Racing EWG Uppipe with Tial 38mm wastegate
Ultimate Racing Catted downpipe
MadDad intermediate pipe(drops to 2.5" at the rear)
SPT Accessory Muffler(aka the Genome)
Sti V4 tranny(4.44)
Sti P180 rear end (not DCCD)
4 pot front 2 pot rear
to many suspenison mods to list but let me know
Bigger injectors and fule pump on the way as well

 

[Jefff]

hmmm i need a new turbo cause my 18G went pop pop....

i dont know if i qualify though lol....

i gots:
-ej257 shortblock(stock)
-RS heads with headwork(PNP, 3 angle cut etc..) and delta cam regrinds (dropping heads off to get done today)
-Hydra
yeeeeeeeeeeah

 

[RS22b]

Dylan, can i put in for 2 cars???

Personally i think this sort of turbo would be great on my Spec B.

Pics arent really quite up to date as i have changed a few things on the outside as outlined below.

1995 Impreza LX coupe:

Motor:
Currently an ej205 long block
Perrin fuel rails
Perrin inlet
Perrin IC hose kit
STi pinks
vf28
PE timing belt
AC delete
standard ej257 on standby...
Turbo legacy x-member
HKS upipe - JetHot coated
Brullen 3in TBE - dual tip, mid tone

Drivetrain:
STi version 6 Type RA - 4.444 FD (no DCCD)
STi SSK
Kartboy shift bushings front and rear
CenterForce clutch kit
Fidanza light fly

Brakes/Suspension:
STi 4-pot (black)
Hawk HP+
RS rears
Hawk HPS
StopTech SS lines
Super Blue
ABS delete - waiting to go in
Master Cyl brace - waiting to go in
DMS 40's
Cusco adj rear sway
TRi Tuning rear strut brace
STi CF front strut brace
Front sway delete
GC8 Alum a-arms, purchased brand new
STi alum cowl braces - awaiting install
OZ Ultra L's - 18x8
Cant remember the tires i have, but size is 225/35 - 18

Exterior
Paint - Champagne Gold Opal. Factory Subaru color, thats right you see this on your Gma's 06' Outback:lol:
All black trim and moldings sanded, prepped and painted flat black.
New wiper cowl.
Door moldings, trunk lock and pwr antenna all shaved.
Seibon P1 CF replica lip
New RS side skirts
New rear spat kit
Prodrive P1 driving light kit w/ 5k HID kit
New RS bumper
New ver.6 Grill
STi CF hare badge
Morrettes w/ 4300 HID H/L kit and 130w in highs.
Depo Black corners, front and side turn signals. Not shown in pics
New RS hood
Genuine STi 22b vents
Bakemono CF S201 scoop
RS doors and mirrors
STi GC8 RA roof vent assy
GC8 red/clear tails
Seibon CF RB5 replica. Center section left CF and cleared with slight pearl to match car.
STi titanium/CF swrt swoosh badge
jdm rear window wiper set - awaiting install
30% tint all around.

Interior:
Full interior color change from Tan to Black...
RS dash conversion
22b Steering wheel
Factory cf dash trim
Factory gauge pod w/Autometer PhantomII 52mm gauges.
RS - A,B,C pillar trims
RS - light gray seat belts
Sparco Milano - black alcantara
Sparco black alcantara:
rear seats
headliner
door panels
rear speaker deck
shift boot
STi LTD black carpet
STi titanium shift knob
STi pedal pad set - awaiting install
22b SS door sills
RS OS handles for all passengers
RS visors

Im sure there are some small things im missing.

If you want pics of my 2006 Spec B #444, please let me know

thx.
_billy

 

[Aphex28]

Billy should definitely get it!!!

 

[Jurzeyfresh]

I vote billy!

Chris

 

[CheshireKat]

hey man! I posted on nasioc.com too. Let me know what you think of my car...

1998 RSTi
DYNO VIDEO http://www.youtube.com/watch?v=UKH7ftX0DfA

I also have a new performance modification. I have a few more things, but they need installation and tuning before being put on and driven around.

with the rack (but no pic of it with my rad bikes yet! Too busy riding them!)

------------------------MODIFICATION LIST------------------------
Engine/Transmission
2004 STi engine
6spd gearbox
r180 rear differential
(by East Coast Swappers)

Cobb Accessport Engine Reflash
Magnaflow Ti-Series Titanium catback
Intercooler Spray
Helix Downpipe
ARC Top Mount Intercooler
ARC Airbox Intake
Walbro 565 Fuel Pump
Braille Carbon Lightweight Battery
Kartboy short shifter
Kartboy 6spd shifter bushings.
Kartboy diff. bushings.

Exterior Mods
JDM STi Fenders with Carbon Badges
"Wangan style" license plate mounting
99 v5-6 front end
JDM STi Aluminum hood
22B Hood vents
JDM V6 Front Grille
Jdm Tail Lights
Jdm rear bumper from Colin McRae/555 Edition car
Jdm Rear lip/spats
Jdm ver 5/6 Front lip
Jdm clear corners
Custom Yellow Fog Lights
Stock Lexus HID Ballast with 4300K bulbs
Painted Side Skirts
JDM rear bumper/beam
JDM STi version 6 spoiler from WRX RA
JDM STi V6 steering wheel with airbag
Pink Impreza badging
Sonic Blue paint by JC Autobody
CWEST Carbon MAF Cover
Carbign Carbon Alternator cover

Interior Mods
JDM STi ver 5-6 Front Seats
2004 sti gauge cluster made by defi custom mounted
Customized leather shiftboot from Redlinegoods.com
ARC Shift knob
STi/WRX Sport pedals
Shajin Customized gauge housing
Defi gauge set
Charcoal Leather Rear seats
3M window tint
Wrx 6 disc in dash cd changer
Sealed doors
Prodrive Racing Harnesses
Hardwired radar detection
Black interior carpet
STi Door Sills
Kenwood DNX5120 with Garmin Navigation and DVD
Infiniti Kappa speakers
Zapco 1000W amplifier

Footwork
'99 5 spokes
Bridgestone re01R Tires
JDM STi Ver. 6 RA Spec C Suspension
Whiteline non adjustable 24mm rear swaybar
Whiteline non adjustable 22mm front swaybar
Rear Gt Spec Heavy Duty Endlinks
06 wrx 4 piston calipers
axxis metal masters brake pads
04 wrx front rotors
Nissan rear 2piston brakes (300zx twin turbo)
axxis metal masters brake pads
jdm ver 5 rear rotors
Stainless Steel Goodridge Brake lines
JDM STi carbon fiber and titanium front strut bar
Jdm STi aluminum control arms.
MINE'S chassis brace




let me know if it is up to spec.

 

[DS1 Motorsports Inc.]

^^ PM me, you're in

RS22b- you're in PM me

Circaisdashiat- PM me

Wrally2.5rs- Gotta pic?