haha all good. I've been looking for a bigger front sway bar and couldnt find anything non turbo over 22 from perrin, cusco, whiteline, etc then thought hell ill just look at that brand addco that people had raved about with the 25mm and sure enough there it is haha
Addco lists the 2212 as a 7/8" (22.2mm) bar for the WRX. The 1" (25mm) 2032 Legacy bar is what you would need as it has the right bends to clear the N/A header, but you'll need to do some work to get bushings as the Legacy uses different mounts than the RS (should be similar to fitting the Tribeca bar).
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.