Subaru Impreza GC8 & RS Forum & Community banner

1361 - 1380 of 2411 Posts

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,363
120ft of DOM ordered, picking it up from Indy Friday!

Sent from my SM-N920V using Tapatalk
 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,368
Blanket over the roof, ratchet strap up front, tubes will sit on the rack and roof. Over hang is about 2.5 feet front and back

Sent from my SM-N920V using Tapatalk
 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,369
What's the game plan there?


And did some more prep work for the cage. Im already sick of rust and sound deadening.



And after 5 years of ownership I finally figured out where my trunk was leaking from.

 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,370
For a mini truck, it sure does the job. Got a stellar deal on DOM thanks to Ben (Aesthetic).

 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,373
4x8' pallet boxes are pefect size for a main hoop and a-pillar bars.
 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,375
Put the rear diff in so I can actually lift the rear of the car up.



Tighter than Subaru's bearing tolerances

 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,378
Went home this weekend for my brothers graduation. My dad was kind enough to let me loot his scrap pile. Scooped some 1/4" plate for my base plates.

 

·
Registered
Turbo, LS swapped Impreza RS
Joined
·
5,171 Posts
Discussion Starter #1,379
Final pieces of the tunnel and floor have been removed. Drive shaft loop, transmission mount, front rails, and floor be connected by tubing to the main hoop cross bar.









Sent from my SM-N920V using Tapatalk
 
1361 - 1380 of 2411 Posts
Top