Subaru Impreza GC8 & RS Forum & Community banner
1 - 3 of 3 Posts

·
Premium Member
01/07 RSTi
Joined
·
942 Posts
Discussion Starter · #1 ·
so i have a set of the blue prodrive springs for the GC and just finished putting on the rears and unless they're going to settle 2" i think somethings wrongs.

Does anyone have the part numbers for the front and rear, because i think i may have gotten it wrong.

the part number on the other springs i have is eh/si/005f which i assumed ment front and the other one had an R where the f is, but i don't remember if the other numbers are the same.

halp?!?
 

·
Premium Member
01/07 RSTi
Joined
·
942 Posts
Discussion Starter · #2 ·
ok i think the problem is the springs just need to settle in, i just didn't expect them to start higher than my stockers.

If anyone has their ride height with prodrive springs (Blue P1's) and KYB GR-2 struts that would be helpful.


Also wanted to check to make sure the springs i took off were stock, heres a picture of em. The only thing that makes me question it is they have red and pink paint marks on the springs, but i don't know if thats stock or not.



Thanks
 
1 - 3 of 3 Posts
Top