Subaru Impreza GC8 & RS Forum & Community banner
1 - 4 of 4 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 · (Edited)
Ok so I have oil leaking from that area. Got the OEM o rings. Took the two 12mm bolts off. Now the plate won’t remove. It move up and down some but won’t pull off. Does it come straight off ? Or is a locking situation where you have to turn it one way to pull it off? Would it be safe to wedge a flathead in there to pop it out? Let me know what you guys have done. Thanks
 

·
Super Moderator
2000 RSTi
Joined
·
1,353 Posts
you might have to tap it one way and then the other, over and over. It does come straight back out. I wouldn't recommend anything more than gentle prying since you could crack the holes the bolts go through.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #3 ·
you might have to tap it one way and then the other, over and over. It does come straight back out. I wouldn't recommend anything more than gentle prying since you could crack the holes the bolts go through.
Thanks that’s what I did. And I came off 👍
 
1 - 4 of 4 Posts
Top