[salvator_rizzo]

there has to be something i am doing wrong, i cant get the two transmission bolt/pin things to line up with the transmission because of the two bolts that go from the engine into the transmission.

is there a writeup somewhere or can someone give me some pointers as to what to do?

 

[asdf]

wrong angle

 

[unforgiven2144]

jack up the tranny as high as you can, makes it a lot easier. just unbolt that mount at the top of it and try to get it up like 2-3 inches

 

[Jake]

drop tranny and engine at the same time?

 

[guesswho]

Un-do the pitch mount, jack up the tranny drop the motor in, try to get the studs to go in at the bottom of the motor/trans. After that snug them a little, lower the motor a little more then put in one of the bolts up top and that should seal it a little more then the last one should be pie.

 

[salvator_rizzo]

that was really helpful, thanks a bunch. we had to struggle for awhile to get those two bolt/pin things to go all the way through, but jacking up the transmission really made it that much easier. can't believe i forgot about that