Subaru Impreza GC8 & RS Forum & Community banner

1 - 20 of 45 Posts

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #1 (Edited)
I wanted a drift car so i pulled a loan and got a Nissan 1991 240sx se with an SR20DET black top swap, FMIC, garret turbo and other goodies.

1991 Nissan 240SX SE Hatchback

Exterior
-Full Silvia front end conversion
-JDM AB Flug Front bumper
-side aero kit
-primer snow camp paint
-Quick release front bumper

Interior
-Cup holder
-Wink 5 panel rear view mirror
-Crown Royal shift boot
-SP2 Bucket Seat
-Drift steering wheel
-Drift button

Motor
-Black top S14 SR20DET (50k miles)
-Garrett S15 Spec R turbo
-550 CC injectors
-Metal Headgasket
-Walboro 255 fuel pump
-Tomei ECU
-SAFC II
-GREDDY EO1 EBC
-FMIC 3" intercooler piping
-SS exhaust manifold
-HKS BOV
-3" down pipe
-high flow cat
-APEXI cat back exhaust
-Z32 AFM
-blitz intake

Drivetrain
-Vicious LSD
-HICAS lock
-twin plate cluch

Suspension/brakes
-STANCE SS+ coilovers
-brembo rotors with axis pads

Wheels
-Rear 18in MR7 225/40/18
-Front 17in MR7 215/45/17

Not many 240s here in Montana. They are not very practical for montana but screw it i want to have fun. Here's a couple pics of my 240.

Current Picture


I'm keeping the snow camo paint for the winter then painting it something else come spring time.


The guy who owned the car has been collecting JDM parts for years and this is a front bumper he brought back from Japan. He lived in Japan for 4 years. Its a little too low for my liking and kind of ugly but i will keep it for now until I can find a stock bumper or something that looks good.


The GET coilovers are crap. So im ordering up some Stance coilovers shortly. It could be lower but I don't like the slammed look.




Engine bay nice and clean


clean interior


EBC and SAFC hooked up. Also got a cup holder from a member on here.


Videos
Big Ol Burnout

Snow drifting
 

Attachments

·
Registered
RWD 5.0 V8/Impreza GM6 Coupe
Joined
·
516 Posts

·
Scooter Stunt Man
1999 2.5OBS
Joined
·
422 Posts
Im super jelly. I want a drift car so bad! I've been keeping my eye out for something like this local to me. Congrats and have fun for fucks sake!
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #6
I'm selling tons of SR parts! If you're interested here is the link. Feel free to PM me on here or Zilvia

CA New/Used/OEM *COMPLETE* SR20DET Part-Out! A lot of Quality Parts! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum
I do need a Power FC with commander. But i wont have that dough for a bit. they're damn pricey but I'm sure they are well worth it. I might need a power steering pump. I will check but i think mines leaking.

Im super jelly. I want a drift car so bad! I've been keeping my eye out for something like this local to me. Congrats and have fun for fucks sake!
O i will have tons of fun. Stay tuned for drift footage and hopefully no curb smacking.
 

·
Registered
RWD 5.0 V8/Impreza GM6 Coupe
Joined
·
516 Posts
I do need a Power FC with commander. But i wont have that dough for a bit. they're damn pricey but I'm sure they are well worth it. I might need a power steering pump. I will check but i think mines leaking.
The Power FC will not work for your engine because they are model specific. Mine is for a S13 Redtop. However, when you are ready to go Power FC you will need a stock ECU I believe. You will want to scrap that Walbro 255 before you tune it as well. Go with a MKIV TT Supra Denso Pump (Trust me on that)

I have 2 power steering pumps. One is a KA24DE with a SR pulley, and the other is SR20DET pump. Both will work for your car.

Let me know if you're into any of my upgrades. I will cut you a deal since you're on RS25 :mamoru:

I Highly recommend you running the OEM Clutch Fan. The OEM Fan makes a huge different! Most pro Formula D drivers (who have SR's) still use their oem fan because it is fail-proof.

I've been working with SR's and around people who know SR's (ex: Frank Siharath of Garage Boso) for a while now. So I'm just trying to help you from future problems
 

·
Registered
99WhiteMock22B/10TeslaRoadster
Joined
·
6,661 Posts
But didn't you see, he was trying to fly by having his hand out of the window. If he had taken flight, he would have completely missed that curb and pole!

I really dig the snow camo, keep it that way!
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #10
Hahahaha yeah that dude pretty much sucked the fatty on the drift attempt. I'm going to take it nice and slow learning to drift properly in an open parking lot with nothing to hit. No need to rush perfection. Haha. First item I'm getting is winter tires cause I got about a month before the snow starts flying. Although I will be driving my impreza as my DD for the winter.
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #12 (Edited)
You will want to scrap that Walbro 255 before you tune it as well. Go with a MKIV TT Supra Denso Pump (Trust me on that)

I Highly recommend you running the OEM Clutch Fan. The OEM Fan makes a huge different! Most pro Formula D drivers (who have SR's) still use their oem fan because it is fail-proof.
Thanks for the good info I will get one of those fuel pumps. I have read they rule. I also do have the OEM fan still on the radiator I just have to run a switch so i can turn it on as i please. The car runs great though. Did a couple small drifts and donuts yesterday. so fun:clap::clap:

I'm going to get a set of these Rota Grids 17x9 +12mm with some 215/40/17 tires.
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #13
Took the car to the Mob Theory Shop to tighten up the front end. Getting new outer tie rods and tension rods. Also getting some stance Coilovers since mine are pretty sloppy. The pillow ball mounts are gone so its time for new ones. I also ordered up a Wink mirror so no more blind spots.
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #17
Are there any rim plans for the future?
Yes in a few months im getting a set of 17x9 Rota Grids. With a +25 front and +12 rear offset. It will look kind of like this


I want to paint it black with a slight purple tint but that gunmetal color looks awesome!
 

·
Registered
1991 Nissan 240SX turbo slider
Joined
·
943 Posts
Discussion Starter #19 (Edited)
Dude you need a journal for the suburban. Those are badass.
Hahaha well thank you. That's my camping and party mobile. Its an 87 with a 350 TBI. I put a 4in lift and some 33in MT tires and chrome rims on it. Its so damn nice for camping and sleeping in. It can fit a queen size air matress. It has rear AC and heater. its also a 9 seater. I can fit my dogs,camping gear, DJ set up and speakers, generator, beer pong table, big wheel and dirt bikes on my suburban. I like to have fun when camping.



usual camping set up. Speakers, beer pong, dirt bikes and fun times!

I have the tall boy and low rider
 

·
needs more cowbell
95L, 07 2.5i, R6
Joined
·
9,282 Posts
That is going to be fun, stay off the curbs. I'd recommend a deatschwerks dw300 pump over the walbro. Mine isn't noisy and it flows over 320lph. The oem denso supra pump is also high quality but you may want to get the upgraded version if you go that route.
 
1 - 20 of 45 Posts
Top