More driving light help....

1281 Views 12 Replies 3 Participants Last post by Mike M, Jan 26, 2002

Mike M

Discussion Starter · Jan 23, 2002

Alright, I finally got my driving lights hooked up tonight, per the instructions included with the lights. Just a couple of problems:

1. The lights won't come on, even when the high beams are on.
2. Now, every time I try to switch on my fogs, they blow a fuse.
and..
3. I have an ABS light on my dash that won't shut off.

Any ideas what I may have done? How about if my ABS is functional or not? I pulled that fuse, it's still good. The light comes on when I start the car as usual, blinks once, and then just stays on.

Basically, I'm a jackass that shouldn't be allowed to own tools.

Any assistance would be appreciated.

Save

1 - 1 of 13 Posts

COwannago

· #12 · Jan 26, 2002

I had the problem with my ABS light not going off when I was poking around to see how to do the foglight mod where you can turn them on or off whenever you liked. Anyway, the ABS light stayed on and my blinkers were going too fast and some other electrical stuff. It turned out when I removed one of the wiring harness plugs behind the fuse box, I didn't reconnect it all the way. I disconnected all the plugs I originally disconnected, reconnected all of them double checking my work this time, and voila! Everything worked fine after that. I would do that if I were you, it's amazing how often that works for anything electrical.

Nick C.

Save

1 - 1 of 13 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month