Subaru Impreza GC8 & RS Forum & Community banner
1 - 4 of 4 Posts

·
Registered
97, Legacy 2.5GT, silver
Joined
·
937 Posts
Discussion Starter · #1 ·
Has any one ever done this? I have a 96 brighton and I am replacing all the wiring in it with 01 rs wiring. I also need to merge it with a 90-94 legacy turbo wiring harness. I need to to wire it for the ecu and engine swap.
 

·
Wiring Guru
01 RS, 97 Ducati
Joined
·
360 Posts
I've done that one a few times. You are better off getting using your 96 harness or even getting a 95 harness. The two harnesses are much more similar. If you are going to do a dash/door car update then you'll have to do the SS into the RS.
 

·
Registered
97, Legacy 2.5GT, silver
Joined
·
937 Posts
Discussion Starter · #3 ·
thats why I am using the rs harness I am swapping out the entire interior adding p/w and everything. it looks like the rs and my original wiring use a seperate harness for the ecu the legacy harness is the entire bulk head harness.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top