[RS-monkey]

so im getting some springs and was wonder ing if i will need an alignment its only a 1.3 and 3/4 drop

 

[Boxer4Dad]

Yep. Once you disconnect the strut's lower bracket from the knuckle, you lose the orientation for the alignment. You can mark the parts, and get it pretty close when you re-assemble, but you should get an alignment afterwards.

 

[bugman1964]

yup need an alignment but whiel your there have them set you front camber as negative as it will go some where around 1.5-2 degrees negative and your front toe near zero. will help out your handling as well.

 

[ride4life32]

Sucks but it is true, same goes for if you change lateral links or most suspension parts.

 

[bugman1964]

Sucks but it is true, same goes for if you change lateral links or most suspension parts.

with the exception of ball joints if you dont mess with any of the adjuster bits.