Joined
·
62 Posts
I'm just wondering whatever became of this product? It sounded great but then failed to work was the last I heard. I see the main page has your story James any updates since then?
Level 10 auto race shifter
1 - 3 of 3 Posts
Really nothing has come out of it. I've been too broke to do anything byt pay bills, and I am not currently racing. Besides, it did not work when I got it so I sent it back (and they were very cool about refunding me) and they said they were going to do further testing.
Contact Pat or Sam at www.Levelten.com and ask - they're the one's who know!
Contact Pat or Sam at www.Levelten.com and ask - they're the one's who know!
well the trick here would just be controllin the shift solenoids but doing it in such a way that is doens't alert the PCM to any problems....hmm....me ponders...will have to look into it.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Solved! JDM 5 speed swap into 95 coupe, driveshaft too short
Transmission & DrivetrainSo i'm about 90 percent of the way through an auto to manual swap in my 95 impreza LX coupe. I am using a JDM TY754VBAAA and trans crossmember out of a v5/6 STI, a 4.44 LSD from an 04 FXT, and a driveshaft out of an 03 WRX. As I understand it, on the impreza there is only the 5 and 6 speed...- 2
- 278
-
BrendoDoesABuild · updated
-
04 2.5rs 5 speed trans into a 99 Impreza 2.2 L
Transmission & DrivetrainBasically what do I need to take off of the 04 Impreza to get the trans to work in my 99 Impreza ? Thanks- 0
- 162
-
BenLance · updated
-
4EAT Diff-Lock Switch and Handbrake Mod - "Torquemada Lite"
Transmission & DrivetrainSynopsis: Phase 1 - Install a switch that allows the user to bypass the 4-speed Automatic Transmission's (4EAT) AWD torque transfer logic in order to "lock" the system into a 50/50 torque split. Phase 2 - Add a switch to momentarily deactivate the "lock" so that the handbrake may be used to...- 334
- 303K
-
V4 front axles
Transmission & DrivetrainHey guys I have rhd v4(not a type RA) drivetrain non dccd. I need a passenger side (driver side for NA) CV axle. Any axle from a 93-05 impreza would work? Thanks- 1
- 192
-
Pull Type Clutch SOS
Transmission & DrivetrainHi all! So I'm almost done with my 2002 WRX -> 2001 RS swap and the pull type clutch confounds me. I think I have the throw out bearing clipped into the clutch as I gave it the authoritative smack outlined in the 02/03 WRX clutch install thread and the click happened like it should. Now, I'm...- 1
- 195
Join now to ask and comment!