Subaru Impreza GC8 & RS Forum & Community banner
1 - 20 of 150 Posts

·
Registered
1991 Justy GL "Overland"
Joined
·
3,641 Posts
Discussion Starter · #1 · (Edited)
Justy Central



I figured there was no dedicated thread to Justy owners, so here it is :sunny:

If you currently own a Justy, have owned a Justy in the past, or just plain like Justy's, then this thread is for you. I know there are a couple owners on here, so lets get this thing rolling.

Pics are welcome, even if they are not yours.


Justy Links:

http://www.dustysjustys.com/
Justy Parts And Knowledge

http://www.cardomain.com/ride/3163356/1993-subaru-justy
STI Swapped Justy

http://subarujusty.proboards.com/index.cgi?board=talk&action=display&thread=2114&page=1
Turbo Justy

-Jamie
 

·
Registered
2000 2.5RS BRP RSTi
Joined
·
1,294 Posts
I HATE YOU! your making me miss my 91' Justy, Was a amazing car. Love these things.

Im sure you know there's a Subaru Justy Forum (I'm sure you know, just making sure. As well for others.) Im missing my car soo much. =C

Subaru Justy Forum - subarujusty.proboards.com/index.cgi
->use to be a active member on there. My names the same ha as on here.
 

·
Registered
1991 Justy GL "Overland"
Joined
·
3,641 Posts
Discussion Starter · #7 ·
I HATE YOU! your making me miss my 91' Justy, Was a amazing car. Love these things.

Im sure you know there's a Subaru Justy Forum (I'm sure you know, just making sure. As well for others.) Im missing my car soo much. =C

Subaru Justy Forum - subarujusty.proboards.com/index.cgi
->use to be a active member on there. My names the same ha as on here.
I too am on the boards there, and also under the same monicker :D

-Jamie
 

·
Registered
1991 Justy GL "Overland"
Joined
·
3,641 Posts
Discussion Starter · #17 · (Edited)
Do you mean AWD or RWD? Definitely see axles going to the rear wheels there.
Actually if you read the build thread on the website they only run in 2WD classes, not sure how it is setup entirely. My guess would be RWD after all.


From the site:

Subaru Justy running mid-mounted 2.5L Turbo Subaru 4-Cylinder and 6 speed gearbox
1st 2WD Open Class at Queenstown Race to the Sky 2006
1st 2WD Unlimited Class at Ashley Forest Rallysprint 2010
Dunlop Targa tarmac rally competitor 2007-09
Successful club car at Ruapuna
 

·
Registered
1991 Justy GL "Overland"
Joined
·
3,641 Posts
Discussion Starter · #20 ·
Anyone have some flare options to cover over the cutting I am about to partake in? My plan is to cut off the material exactly where the factory "flare" is already, to gain a little more tire clearance for the offroad setup. From everything I have read so far, Justy's hate being lifted unless you do the right adjustments to the subframe and such in order to drop the symmetry of the drivetrain. The PO hacked off the rust he saw and did a crappy job of sealing it with roll on bedliner :( To make matters worse, he sprayed expanding foam all inside the rear Qtr panels, so now I have to dig that crap out before welding up the seam again.





 
1 - 20 of 150 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top