Subaru Impreza GC8 & RS Forum & Community banner
1 - 13 of 13 Posts

·
Registered
2017 STi
Joined
·
9,572 Posts
Where do you live? What City that is.
 

·
Registered
2017 STi
Joined
·
9,572 Posts
Reason I am asking is because I wouldn't heat wrap them if you live in a wet environment. Water can soak into them and cause them to rust. If you want, just get some high temp header coating and put that on. Pretty sure you will have to sand them down a bit before you put on the header coating.
 

·
Registered
2017 STi
Joined
·
9,572 Posts
Pretty sure these are the gaskets you need.
 

·
Premium Member
2005 rs silver
Joined
·
1,313 Posts
wipe the pipe down with wd40 before u put it on and use rubber gloves while handleing it so ur skin oils arent on it... and it look soo cool itll turn like gold and purople and blue
 

·
Registered
2000 2.5 RS-T srp sedan
Joined
·
2,732 Posts
if you can fins some one to high temp spray..do that first..


If not then wrap them and then use a SILICONE SPRAY all over the wrapping to protect it against water/dirt and oil.
 

·
Registered
MY06 GD9 EJ201 SOHC
Joined
·
94 Posts
...if u simply wrap with fibreglass heat wrap, all u need to do is after the wrap spray it with water and go for a drive and the wrap will schrink and provide enough insulation etc for the headers. no need to do so many steps of hi temp spray and silicon spray etc as this will defeat the purpose of the heat wrap.
 
1 - 13 of 13 Posts
Top