Subaru Impreza GC8 & RS Forum & Community banner
1 - 17 of 17 Posts

·
Registered
Joined
·
352 Posts
Discussion Starter · #1 ·
i posted the same thing in the i-club, but wanted to share with you guys more :D

let me just say that this thing screams (<--my face when i heard it at WOT for the first time)
( <---- my g/f's face while in the car holding on)

she noticed more of a difference as a passenter than me as the driver. she's in the car all the time so she knows what it feels like. i may be going to do a drag strip soon to get some hard numbers.

my best time previously with the ganz-flow was a 15.4
this time i'll have pulley's on and the injen in-place of the ganz.

i'm guessing around 15.1 - 15.2. hoping for 14.9-15.1

will post picture later
 

·
Registered
Joined
·
300 Posts
Well i don't know where he goes but the Drag strips have already opened. At least where i live. MIR (Maryland International Raceway) has midnight madness on Sun and Test and tune on sat. and Capitol Raceway will be open very soon for night racing, thier already open for day racing. Its pretty much Spring around here.:sunny:

If you run that fast of a time with only Pulleys and an Injen Intake i will be very impressed! My friend ran around a 15.2 with intake, pulleys, Exaust and Midpipe. He did have a 99 also and i dont know if they are any slower.Post times when you get them.
 

·
Registered
Joined
·
352 Posts
Discussion Starter · #4 ·
atco raceway in jersey is most likely where i will go, or englishtown.

atco was where i got the first times. it was in september last year

i will post pics later today, i left my camera in the car and it's too cold and late to go back and get it.
 

·
Registered
2004 Forester XTi
Joined
·
1,005 Posts
Curious... did you have to remove the wheel well to get the filter inside the fender? Installation seems to take a little more time to get done than other intake installations, right?
 

·
Registered
2000 Subaru Impreza 2.5 RS Asp
Joined
·
152 Posts
trojan9x said:
overall it took about 1 1/2 hours.

BUT....that included the resetting of the ecu and letting it run for a 1/2 hour when done putting it in. and changing my wheels at the same time.
what does the filter look like? how far into the fender doest it go?
 

·
Registered
Joined
·
352 Posts
Discussion Starter · #11 ·
looks like your run of the mill K&N cone filter with red silicone housing.

fender lies behind the orange passenger side vent in the bumper. probably about 8-12 inches behind it on top of the whell well lining.
 

·
Registered
2000 Subaru Impreza 2.5 RS Asp
Joined
·
152 Posts
trojan9x said:
yea, it only comes with red accesorie hosing. and polished pipe is the only option for my model. i'm sure you could buy blue hose and connectors if you wanted.
are the hoses long enough to run to a catch can if you wanted?

The intake looks good btw.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top