Subaru Impreza GC8 & RS Forum & Community banner
1 - 4 of 27 Posts

· Registered
4 Posts
tonight i installed 04 sti struts with tein stech springs. the front came out great, bolted right up with the 04 sti tophats..

as for the rear, i stuck with the stock 97 l tophats, and i used the rubber piece from the 04 tophat to fit the springs, because the piece that goes between the tophat and the spring from the L would not work from some reason..

my problem aswell is the back is very high!! almost like stock.

what is the advantage to using the legacy rear tophats? what is it going to take to get the rear of the car lower.. seems like we both have the same issue!
1 - 4 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.