[Santo Domingo 2.5 RS]

Hi, i have really searched a lot, and i just foud lots of different splicing or cutting wires information, on some threads it says that is ifferent for the 2000 RS because the wires are different color or something like that.

i have and HID system and i dont see the need to have it on all the time since it is to bright and bothers oncoming drivers. So i was thinking about runnning the fog lights with just the parking lights, i now this mod has been cover lots of times beafore but i still havent found a clear procedure to do this on a 2000 RS.

Here where i live there are not any laws about running auxiliary lights only, so there is not going to be a problem if i do this.

Can any of you help me out ??

 

[Elite421]

I did that mod all most a year ago on my 01RS and im pretty sure i used the directions from Scobiemods.com i don't think that there is to much difference between the 98-99 and the 00-01. I remember that there were a few things that were a little different, but nothiung i could not figure out. And i don't know squat about electical wiring, Just make sure you take your time!!! i spent about a hour just looking at the instructions and under the dash trying to figure out what is what before i did anything. In the end i had fully independent fog lights that would not turn off when i turned my car off and almost ran my battery dead a couple of times! well i hope this helps
Alex

 

[Santo Domingo 2.5 RS]

the mod on sccobymods.com is the one to have your fogs come on when using your high beams, what i want is to be able to use them with parking lights

 

[Elite421]

Oh sorry then that is not where i found it. Mine were fully independent. I try to find it and post a link.
Alex

 

[Elite421]

This is what i used but i think i might have messed up a little on it b/c i could turn them on whenever, even if my car was completly off.Go here
ALex

 

[Santo Domingo 2.5 RS]

ELITE that link to that file is not working, when i downloaded it a bunch of little numbers and draws appeared!!

can you send me the file to [email protected]


thanks!!

 

[Elite421]

I Just sent you the file! i open it with Acrobat. Let me know how it turns out!
Alex