Subaru Impreza GC8 & RS Forum & Community banner

1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1 (Edited)


Spiider Plus 10% discount Use Code: rs25spiid10%
Advanced DCCD Controller with Integrated Slippage Control Processor

  • A dual processor intelligent DCCD Controller
  • Dedicated processor for slippage control
  • Unique and powerful Spiider technology for a real hands free operation
  • Driver adapting capability with adjustable sensitivity
  • Complete system for DCCD operation and is independent of ECU/ECM
  • Does not need any part of ABS system except the two wheel speed sensors
  • Fully programmable through USB cable using a free application
Link to the product page
Note:This is an RS25 members only discount
 

·
Premium Member
2001 SRP 2.5RS/RA/SOHC Monster
Joined
·
2,734 Posts
Wanna elaborate on the two 'Except two wheel speed sensors" line?
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
Glad to elaborate. The slip monitoring processor takes direct signal from the wheel speed sensor (one on front axle and the other on rear axle) to sense any imbalance between the two re slippage. That is all is needed which has any connection to ABS system.
 

·
Premium Member
2001 SRP 2.5RS/RA/SOHC Monster
Joined
·
2,734 Posts
So it only measure one front and one rear wheel? Seems insufficient.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #6
So it only measure one front and one rear wheel? Seems insufficient.
Note we are not doing stability control here as this product is for Motorsports application other sensors are involved and a cross setup is recommended. Please get in touch with our technical at [email protected] for deeper dive down if interested.
 
1 - 6 of 6 Posts
Top