Subaru Impreza GC8 & RS Forum & Community banner

1 - 4 of 4 Posts

·
Registered
Joined
·
247 Posts
Discussion Starter #1 (Edited)
air intake with turbo setup

i was just wondering what air intakes you guys are using for your turbo RS setups. im beginning to piece together a turbo kit and just want to know what eveyone is running. this is hard.. but fun.
 

·
Registered
Joined
·
852 Posts
I'm just using a K&N filter. I pulled it off the intake on my brothers Civic before he sold it and it works fine.


Graham
 

·
Registered
2001 2.5RS
Joined
·
23 Posts
All you need really is a tube and a filter over it. You can vent the crank case vents into atmosphere with filters over them. Or you can use a build a custom tube with the small inlets welded into them for the three crankcase vents. If you have an aftermarket CAI the cut it and weld three inlets into it. Shold only cost you about $30?? for the weld job.

-Rich
 

·
Registered
Joined
·
852 Posts
I had a custom intake made for mine with three crankcase inlets on it, all aluminium.

You can see them if you go to the link:

www.pbase.com/graham222



Graham
 
1 - 4 of 4 Posts
Top