Torque specs are based on bolts being torqued dry unless otherwise specified in the FSM where lubrication, loctite or antiseized is used since torquing lubricated bolts leads to overtorquing (can range between 25-40%)Thank you very much! I was questioning the 2 bolts for the rear mount. Its listed as 181, but I removed those 2 bolts with ease with a breaker bar.
Also, can I use a little antiseize on these suspension bolts?
edit: the old thread lists 181 +\- 36ftlbs, does that mean the torque can be higher or lower than 181 by 36fts? I think my wrench goes to 175 max.
+/- is the range for torque specs.