98 2.5rs ecu - Subaru Impreza GC8 & RS Forum & Community: RS25.com
 
Private Support i-Trader Ratings Become a Vendor Rules for VendorsModsUsers Contact
Subaru Impreza GC8 & RS Forum & Community: RS25.com
gc8 RSS GC8 Facebook Subaru GC8 Twitter Subaru YouTube Channel Subaru Sticker
 
Login below or Register Now
Register Mark Forums Read FAQ Advertise
Go Back   Subaru Impreza GC8 & RS Forum & Community: RS25.com > >
98 2.5rs ecu
Reply
 
Thread Tools Display Modes
Old 11-12-2018, 01:08 PM   #1
Bobcat
1.8L
 
Car: 98 Arcadia 2.5rs
Join Date: Feb 2016
Trader Rating: (0)
Posts: 49
Default 98 2.5rs ecu

I have a 98 2.5rs that I manual swapped. Car is running fine but idle is rough and will die when I come out of gear (coming to a stop sign, red light, etc). It seems like its mainly struggling in closed loop as above 3000rpm it runs really well.

I have heard mixed reports on whether the 98 2.5L ECU is different between Auto and Manual. And if this can be completely remedied by grounding one of the pins. According to North Ursalia, I should have to ground pin 81, from the ecu for it to think its a manual. Or do you simply leave this an open circuit? Is there a way to identify if it is a Manual ECU or not if I buy one off ebay? I am assuming that once you ground/open circuit this wire the TCU will need to be removed as well. The car will start and drive fine, so Neutral Safety Switch is working appropriately, but the idle is and low rpm driving is struggling.

I do not believe I am having any vacuum leaks, or o2 sensor issue as it has not thrown a code for it, and I have brand new oem o2 and MAF sensor. I also put a new IACV on it.

Thanks for the help, I have read through the Auto to Manual swap but some areas seem grey as whether or not they help.
Bobcat is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 04-12-2019, 12:30 AM   #2
Wwwwwrx
1.8L
 
Car: GC8 Type A 1992
Fav Mod: done by me
Join Date: Apr 2019
Location: FL
Trader Rating: (0)
Posts: 20
Default

really auto and manual ECUs are different, but don't know exactly which one will work.
I suppose that ECU thinks that car is on parking now?
in this case you need to ground pin 81 so it will be on Neutral, but not Drive
Wwwwwrx is offline   Reply With Quote
Old 04-13-2019, 04:05 PM   #3
jeff6666p
3.3L
 
Car: 98 impreza rs black
Join Date: Sep 2014
Trader Rating: (0)
Posts: 591
Default

If you converted to a manual you need a manual ecu
jeff6666p is online now   Reply With Quote
Old 04-14-2019, 02:09 AM   #4
FryphaX
Premium Member
 
FryphaX's Avatar
 
Fav Mod: Registration!
Join Date: Nov 2012
Location: Home - U.P. of Michigan Work takes me everywhere.
Trader Rating: (4)
Posts: 2,509
Default

Quote:
Originally Posted by jeff6666p View Post
If you converted to a manual you need a manual ecu
Nah, just ground that pin.
__________________
2001 SRP Coupe 8300RPM SOHC 257, 71 HTA, DCCD RA Drivetrain and ms3-Pro
FryphaX is offline   Reply With Quote
Old 04-14-2019, 05:46 PM   #5
Jack_Stalk
www.jackstalk.com
 
Jack_Stalk's Avatar
 
Join Date: Oct 2008
Location: New Jersey
Trader Rating: (47)
Posts: 5,341
Default

Paging #bansheeboy12, he loves idle issues on auto to manual swaps
Jack_Stalk is offline   Reply With Quote
Old 04-15-2019, 12:47 AM   #6
SoCoNoHa
2.7L
 
Fav Mod: Anything custom
Join Date: Feb 2018
Location: Southern NH
Trader Rating: (1)
Posts: 312
Default

I was trying to solve the stalling issue today. Until now, I had a jumper to feign neutral and allow the car to start since my actual NPS is backwards (open in neutral, closed in gear). Well I fitted a relay with a normally closed config to reverse the NPS and wired it in so the car only starts in neutral, when I'm in gear the ecu knows it.

100000% smoother take offs and low rpm operation. I figured the slight bogging was either me or the clutch or a tired engine, but no. I can now be crawling along in first gear at like 1000 rpms, and applying the gas no longer makes the car buck and jerk.

Still occasionally stalls at stops tho.
__________________
92 SVX / 95 GM2 / 02 GDE / 03 GDA
SoCoNoHa is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 01:08 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright © 2019 VerticalScope Inc.
Designed & Powered by Domain Architect