Hi so I’m a subi newbie wanting to install a oil temp gauge along with a oil pressure gauge on a N/A ej25d and I’ve looked around and determined that I’m probably going to use the front oil gallery with a t fitting and I’ll put the oil pressure sensor and keep the dummy light on that t but I don’t know where would be the best for the temp sensor and everything I would need to purchase to make this happen, I know I’ll probably need adapters and probably a relocation kit. so I’ve come to ask for assistance and links to the things I need to buy to make it work, links would be great, If needed I can provide more information if need be first time posting and first time doing this install so I’ll probably add more questions
Thanks so I’m probably going to continue with putting the pressure and the dummy light on the top front gallery under the alternator and the temp on the rear top gallery what should I get to properly have all the adapters and to make sure everything has proper clearance
There's also the other port on the back of the block passenger side by PVC. Thats were I'll stick my oil temp. And like you said just T of the front. The dummy light wont shine if you just unplug it. It's more of a replace bearings light, only goes off a 2 psi or something ridiculous. Or tap back of a head little more envolved.
That’s probably what I’m going to do pressure up front temp out back how’s the clearance on it and aren’t the threads a pain to find adapters for that’s the thing I want to make sure I’ll have everything to plumb it up in one go because the folks at the hardware store know me by a first name basis lol