Also if you have a full cage you risk hitting your head on the bar above the windshield.
In the open plug underneath the steering column. That is where I put mine and it works great. The pic below is how I did it to begin with. Later I cut the other half of the plug from the clock spring leaving some wire and soldered the resistor to the wire. I used a 3.3 ohm resistior.
The drivers side airbag uses three wires on my car. I have the older airbag system with the two separate horn buttons.
NO AIRBAGS. We die like real men.
damn!!! i just swapped MOMO WRX wheel on my 97L...i notice that the connector is different on the airbag so i left it unplug...so now i have my airbag light on...my question is
- does my passenger airbag not working too now?
- and since i didn't plug the connector, i won't be having airbag explode in my head because i didnt connect them right???
i never thought about all this before...damn got me thinking now
Is there a good write-up on removing them safely? I need to take out my passenger side. I have a cage + seats + Harnesses, and actually to be legal for hillclimbs the airbags must be removed or disabled.