Originally Posted by scruff3333
Curious on how close the alignment is. May pick up a kit for me if it's close enough. Enjoy the videos a bunch. Keep in coming.
Got an alignment check done
The specs I set with the kit
FR Camber -2.6 Caster 2.8 Toe out 1/32nd
FL Camber -2.6 Caster 3.2 Toe out 1/32nd
Total front Toe 1/16th of an inch out
RR Camber -1.5 Toe 0
LR Camber -1.4 Toe 0
FR Camber -2.7 Caster 2.8 Toe out 0
FL Camber -2.7 Caster 3.0 Toe out 0
Total front Toe 0
RR Camber -1.5
LR Camber -1.3
Rear toe 1/32nd in
I maxed out Camber in the rear and went a little bit too much in the front after playing with the ride height and it increasing the camber, but I'm just going to stay where it is.
After redoing the Toe when I got home I saw what I did wrong and just rushed my measurements and corrected it. I may get another check just to make sure I'm good now, but it got me closer than some alignment shops have in the past.