So after much deliberation and many sketches i ended up mounting the srs unit.
No brackets. slightly modified srs unit.
First i unbolted the lower dash beam supports,placed blots throught the upper holes facing backwards
spaced the bottom out with a big old 10mm spacer
The srs unit has two screws on the bottom. remove these and you can modify the base plate that it mounts on.
I cut two 8mm wide x 20mmlong diagona slots they start about 5mm above the original mounting holes
then used the existing m6 holes for the rear mount
placed two nuts over the bolts and snugged down.
sketchy maybe...but whatever im brave.
i need to seal up the steering colunm at the fire wall,mount the steering bag, mount the front srs sensors, plug it all in and my interior