FS (USA,AZ): FXT 5 speed drivetrain. 2000 shipped to us 48 - Page 4 - Subaru Impreza GC8 & RS Forum & Community: RS25.com

SubeSTile · 02-16-2010, 12:52 PM

including lateral links, front and rear fxt sways and control arms to compensate for the longer axels for those worried about that

immortal1kon · 02-16-2010, 04:22 PM

ok took your advice talked to the right people and i am still interested. i currently have a delicate situation so the best i can do is let you know by the end of the week if i can go ahead and send you the money or if i need to wait ...... (court issuses)

SubeSTile · 02-16-2010, 11:29 PM

ok man, keep me posted i will be removing everything this weekend or later this week if time permits.

**joltdudeuc** · 02-18-2010, 12:17 PM

I'm interested. what I'd like to know is MPH per gear. Mostly, 1st gear and 2nd gear. I want taller than RS gearing, which I don't think I can get with the 4.44 final gear. Does anyone know what top of 2nd would be at 6250?

Eventually I will be doing a motorswap, and I don't want to run the 6spd, because the gears are crazy short, and I don't want to be shifting from 2nd to 3rd and back all the time.

I'm currently looking for a WRX transmission where the final drive ends up at 3.9, but if for some reason this can get my RS to 60mph in 2nd gear, it should work out for me on a turbo motor that revs to 7k as well, 60mph+.

So with that, I'm interested.

**joltdudeuc** · 02-18-2010, 12:38 PM

Looks like at 24.8" diameter, 4.44 final, 1.947 2nd gear:

6000rpm = 52mph
7000rpm= 60mph

This is what my RS is right now... *sigh* I'll think about it.

SubeSTile · 02-20-2010, 10:03 AM

Bump still available until someone commits

flatlandfreak66 · 02-20-2010, 12:57 PM

Quote:

Originally Posted by SubeSTile

no trades at the moment, i have already ordered all the parts the car is needed, unless your local to phx and can build cages

i can tig weld it if you got the machine???

SubeSTile · 02-20-2010, 10:06 PM

ive got a welder already i was mostly joking. still available

SubeSTile · 02-23-2010, 12:34 AM

tuesday bump, coming to cali this weekend could deliver to san diego area

wombatsauce · 02-23-2010, 09:50 AM

Zoinks..

02-23-2010, 09:50 AM	#40 (permalink)
wombatsauce 2.2L Car: '95 Aegean Blue Coupe My: Subaru Parts Join Date: Dec 2004 Location: SF Bay Area Trader Rating: (2) Posts: 135	Zoinks.. Last edited by wombatsauce; 02-23-2010 at 10:09 AM.. Reason: may have found one, and not sure what is involved with this setup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-16-2010, 12:52 PM	#31 (permalink)
SubeSTile 1.8L My: Subaru Parts Join Date: Apr 2005 Location: AZ Trader Rating: (1) Posts: 11	including lateral links, front and rear fxt sways and control arms to compensate for the longer axels for those worried about that

02-16-2010, 04:22 PM	#32 (permalink)
immortal1kon 2.5L Car: 97 silver legacy gt. Fav Mod: new engine 2.5NA My: Subaru Parts Join Date: Aug 2006 Location: Springfield VA Trader Rating: (0) Posts: 263	ok took your advice talked to the right people and i am still interested. i currently have a delicate situation so the best i can do is let you know by the end of the week if i can go ahead and send you the money or if i need to wait ...... (court issuses)

02-16-2010, 11:29 PM	#33 (permalink)
SubeSTile 1.8L My: Subaru Parts Join Date: Apr 2005 Location: AZ Trader Rating: (1) Posts: 11	ok man, keep me posted i will be removing everything this weekend or later this week if time permits.

02-18-2010, 12:17 PM	#34 (permalink)
joltdudeuc Old School Car: 99 GM6 RBP Fav Mod: Driver My: Subaru Parts Join Date: Feb 2002 Location: Union City, CA Trader Rating: (2) Posts: 516	I'm interested. what I'd like to know is MPH per gear. Mostly, 1st gear and 2nd gear. I want taller than RS gearing, which I don't think I can get with the 4.44 final gear. Does anyone know what top of 2nd would be at 6250? Eventually I will be doing a motorswap, and I don't want to run the 6spd, because the gears are crazy short, and I don't want to be shifting from 2nd to 3rd and back all the time. I'm currently looking for a WRX transmission where the final drive ends up at 3.9, but if for some reason this can get my RS to 60mph in 2nd gear, it should work out for me on a turbo motor that revs to 7k as well, 60mph+. So with that, I'm interested.

02-18-2010, 12:38 PM	#35 (permalink)
joltdudeuc Old School Car: 99 GM6 RBP Fav Mod: Driver My: Subaru Parts Join Date: Feb 2002 Location: Union City, CA Trader Rating: (2) Posts: 516	Looks like at 24.8" diameter, 4.44 final, 1.947 2nd gear: 6000rpm = 52mph 7000rpm= 60mph This is what my RS is right now... sigh I'll think about it.

02-20-2010, 10:03 AM	#36 (permalink)
SubeSTile 1.8L My: Subaru Parts Join Date: Apr 2005 Location: AZ Trader Rating: (1) Posts: 11	Bump still available until someone commits

02-20-2010, 10:06 PM	#38 (permalink)
SubeSTile 1.8L My: Subaru Parts Join Date: Apr 2005 Location: AZ Trader Rating: (1) Posts: 11	ive got a welder already i was mostly joking. still available

02-23-2010, 12:34 AM	#39 (permalink)
SubeSTile 1.8L My: Subaru Parts Join Date: Apr 2005 Location: AZ Trader Rating: (1) Posts: 11	tuesday bump, coming to cali this weekend could deliver to san diego area

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)