Welded rear diff donuts! - Page 6 - Subaru Impreza GC8 & RS Forum & Community: RS25.com

Albanianimpreza · 11-07-2009, 09:49 PM

i can get my car out sideways usually fairly well. and yes all drumbee23s questions are mines so please...insight!

**drumbee23** · 11-07-2009, 10:10 PM

ok after reading through a thread i found this

"3.454 / 2.062 / 1.448 / 1.088 / 0.780 / 4.111FD - '02-'04 USDM Impreza 2.5RS/'05 Impreza 2.5RS Sport"

would this include an 02 2.5TS im thinking it does...now if im correct mine dosent hav a LSD. was that like only 2000/2001 2.5rs.

but technically if i found another 4.11 rear diff and welded it i could do "more fun" donuts. of would a clutch type lsd be better. i geuss i also have to worry about my tranny/axles...if i have a welded diff and try to make sharp turns it would shurely kill the axles right?

where i found the drive ratios

Suubarruu · 11-08-2009, 02:09 AM

I will post pics of my welded diff in the morning. It's a very simple mod and all you need is a MIG welder w/gas, a 4.111 diff and the right tools.

9IMPUREZA6 · 11-24-2009, 11:46 PM

Quote:

Originally Posted by GF8er

So scraping your 2003 jeep on rocks at 5 miles per hour is what you're into? That's cool.

take your attitude and wrx back to nasioc, we don't need that shit here.

..... burn

Albanianimpreza · 11-25-2009, 12:25 AM

still no diy??

wishicoulddrift · 11-25-2009, 01:57 AM

Look at nissan, mazda, and toyota forums. The drift guys weld thier diffs up all of the time, and it is the same process...

...Now for my .02...
1.) Welding and R160 will result in a broken R160, just a matter of time (ask RWDwagon if you dont believe me)

2.) CVs will go out as well with extended or agressive use.

This is fun for a short bit, but by no means is this a long term mod. The drivetrain will not hold up, bottom line. Then again doing any type of motorsport will wear out the various parts a lot faster, so do what you want, just understand this is not a set-it and forget-it mod.

-Stephen

Albanianimpreza · 11-25-2009, 08:47 AM

psh nobody said it was dude. least i did it, i just wanna use it for a month take some nice vids, enjoy myself then put on my original diff. duh

and could you post a link so i dont have to search? lol

wishicoulddrift · 11-25-2009, 06:06 PM

Hahaha... No

I will leave the tough detective work to those who think they have all the angles worked out.

- Stephen

Albanianimpreza · 11-25-2009, 06:17 PM

lol whos that? because i just want a step by step. lol

**GF8er** · 11-25-2009, 06:22 PM

How To Weld An Open Differential *Approved* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Boom

11-07-2009, 09:49 PM	#51 (permalink)
Albanianimpreza 2.0L Turbo Car: 09' Forester, 00 RS, 02 Legacy Fav Mod: the girl in my pass seat My: Subaru Parts My: Subaru Blog Join Date: Jun 2007 Location: Somewheres, NY Trader Rating: (1) Posts: 1,006	i can get my car out sideways usually fairly well. and yes all drumbee23s questions are mines so please...insight! __________________ I Hate overpriced fucks.

11-07-2009, 10:10 PM	#52 (permalink)
drumbee23 Premium Member Car: N/A bugeye Wagon Fav Mod: borla rep...tsudo catback My: Subaru Parts My: Subaru Blog Join Date: Sep 2008 Location: lancaster pa Trader Rating: (4) Posts: 1,140	ok after reading through a thread i found this "3.454 / 2.062 / 1.448 / 1.088 / 0.780 / 4.111FD - '02-'04 USDM Impreza 2.5RS/'05 Impreza 2.5RS Sport" would this include an 02 2.5TS im thinking it does...now if im correct mine dosent hav a LSD. was that like only 2000/2001 2.5rs. but technically if i found another 4.11 rear diff and welded it i could do "more fun" donuts. of would a clutch type lsd be better. i geuss i also have to worry about my tranny/axles...if i have a welded diff and try to make sharp turns it would shurely kill the axles right? where i found the drive ratios __________________ Supers587"Hondas were meant to be NA,Subarus were born for boost"buildthread

11-25-2009, 12:25 AM	#55 (permalink)
Albanianimpreza 2.0L Turbo Car: 09' Forester, 00 RS, 02 Legacy Fav Mod: the girl in my pass seat My: Subaru Parts My: Subaru Blog Join Date: Jun 2007 Location: Somewheres, NY Trader Rating: (1) Posts: 1,006	still no diy?? __________________ I Hate overpriced fucks.

11-25-2009, 08:47 AM	#57 (permalink)
Albanianimpreza 2.0L Turbo Car: 09' Forester, 00 RS, 02 Legacy Fav Mod: the girl in my pass seat My: Subaru Parts My: Subaru Blog Join Date: Jun 2007 Location: Somewheres, NY Trader Rating: (1) Posts: 1,006	psh nobody said it was dude. least i did it, i just wanna use it for a month take some nice vids, enjoy myself then put on my original diff. duh and could you post a link so i dont have to search? lol __________________ I Hate overpriced fucks.

11-25-2009, 06:17 PM	#59 (permalink)
Albanianimpreza 2.0L Turbo Car: 09' Forester, 00 RS, 02 Legacy Fav Mod: the girl in my pass seat My: Subaru Parts My: Subaru Blog Join Date: Jun 2007 Location: Somewheres, NY Trader Rating: (1) Posts: 1,006	lol whos that? because i just want a step by step. lol __________________ I Hate overpriced fucks.

11-08-2009, 02:09 AM	#53 (permalink)
Suubarruu 3.3L My: Subaru Parts Join Date: May 2006 Location: Che3sy Wi5c0ns1n Trader Rating: (3) Posts: 530	I will post pics of my welded diff in the morning. It's a very simple mod and all you need is a MIG welder w/gas, a 4.111 diff and the right tools.

11-25-2009, 01:57 AM	#56 (permalink)
wishicoulddrift 2.7L Car: RWD 95 RSTI Fav Mod: Watanabe Drift Center Dif My: Subaru Parts My: Subaru Blog Join Date: Oct 2007 Location: Wonderland Trader Rating: (0) Posts: 360	Look at nissan, mazda, and toyota forums. The drift guys weld thier diffs up all of the time, and it is the same process... ...Now for my .02... 1.) Welding and R160 will result in a broken R160, just a matter of time (ask RWDwagon if you dont believe me) 2.) CVs will go out as well with extended or agressive use. This is fun for a short bit, but by no means is this a long term mod. The drivetrain will not hold up, bottom line. Then again doing any type of motorsport will wear out the various parts a lot faster, so do what you want, just understand this is not a set-it and forget-it mod. -Stephen

11-25-2009, 06:06 PM	#58 (permalink)
wishicoulddrift 2.7L Car: RWD 95 RSTI Fav Mod: Watanabe Drift Center Dif My: Subaru Parts My: Subaru Blog Join Date: Oct 2007 Location: Wonderland Trader Rating: (0) Posts: 360	Hahaha... No I will leave the tough detective work to those who think they have all the angles worked out. - Stephen

11-25-2009, 06:22 PM	#60 (permalink)
GF8er Premium Member Car: 98 OBS, Black/Grey Fav Mod: V5 EJ207 + 4.444 My: Subaru Parts My: Subaru Blog Join Date: May 2005 Location: PDX Trader Rating: (33) Posts: 2,422	How To Weld An Open Differential Approved - Zilvia.net Forums \| Nissan 240SX (Silvia) and Z (Fairlady) Car Forum Boom __________________ "A hand job is a mans job, A blow job is yo job!"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode